Class A Customs EPDM Kit | 9.5 ft Wide X 20 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk

classAcustoms EPDM Single-Ply Membrane is the newest Technology in RV roofing. Our single-ply EPDM is white all of the way through. No black backer that can separate later in life.It’s high level of strength, durability and resistance to UV rays, make it a natural choice for RV roofs. MEMBRANE SHIPS FOLDED! Depending on size of kit you will get one or two boxes (glue / membrane) Remove membrane from box as soon as possible onto clean roof of unit. DO NOT allow membrane to touch ground or dirty surface DO NOT allow membrane to touch sharp objects or surfaces. Membrane may be installed with either side facing the glue but is normally installed smooth side down. classAcustoms Water Base Adhesive grows stronger and adheres more with age and is designed to bond EPDM, PVC, TPO and Hypalon to wood fiberboard, plywood, EPS, any typical polyisocyanurate insulation, gypsum, concrete, etc. Fast Drying best when installed in air temperatures over 50 deg F (10 deg C) COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil) - May be applied by spray, roll coating, or by brush. classAcustoms Self-Leveling Silicone Caulk is designed and formulated to provide excellent weather resistance. This compound provides good adhesion to a variety of substrates. Putty tape is Non-hardening, pliable putty tape which waterproofs overlapping metal seams. Be sure to use all products before expiration date and DO NOT allow products to freeze

• 20 Foot Long by 9.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick – Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
• 4 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
• KIT INCLUDES 2 Rolls of Putty Tape (1/8" Thick x 3/4" W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
• 1 Gallon of Acrylic Rubber Roof Adhesive (Water Based))
• **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to "relax" for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item "rests". **